Inlet Air Cooling for Compressors Compressors are designed to operate at specific atmospheric conditions 15 Deg C & 60% RH De-rating can be as high as 20-25% For a given volume mass flow rate will increase with cooler air Cooler air is dense and dryer and hence easily compressed This results in lower work by […]
IE4 Motors with VFD IE4 motors are also equipped for frequency converter (VFD) duty. By using IE4 motors together with a premium VFD there can be several benefits including better process control, energy savings and a reduced starting current. It can further reduce stress on mechanical equipment and the electrical supply network Benefits: High efficiency […]
Industrial Automation Online Coal GCV Analyser Benefits: Helps in real-time analysis of coal GCV & Reduction in loss of generation due to poor coal quality Automatic Blowdown-Control System Benefits: With automatic blowdown, one can avoid keeping the TDS too low than what is required & can Minimise energy loss from boiler blowdown Intelligent Flow Controller […]
Cooling solutions from Low Grade Waste heat recovery (Vapour Absorption Machine) A vapour absorption chiller (VAM) is a machine to produce chilled water using heat sources such as steam, hot water, and gas. A fluid pair of lithium bromide and water are used in commercial VAM. The refrigerant used is actually water, as that is […]
High Grade Waste Heat Recovery Scrap Preheating with Electric Arc furnace Exhaust Regenerative Burners for Reheating Furnaces Recuperator Continuous Scrap preheating system Electric arc furnace involves a high-temperature melting operation. The average temperature of the melt inside the furnace is about 1650 °C. The waste gases or off-gases from the furnace leave at about 900-1200 […]
